Flexibly expandable with additional sensors and/or location-related equipment
Varying requirements demand different equipment and flexible options.
BLIDS network - accessories
Overview | System | Hardware & Software | Configuration & communication | Accessories
Varying requirements demand different equipment and flexible options.
BLIDS Software|
The following accessories are available for the BLIDS network systems:: Radar Microprocessor controlled radar detector (Falcon PLUS 3) for motion and speed-dependent circuitry applications and the output of values for speed, profile values for vehicle classification and net time gaps. Vehicles are detected that are approaching or traveling away (direction can be adjusted). The radar detector has an elliptical range of detection. Installation case The installation case (FIBOX) is constructed of fiberglass-reinforced polyester and is suited for operation outdoors. A pressure compensation element is built-in to compensate for pressure variations due to temperature fluctuations. WBU straps are screwed on to the back for mounting. Dimensions (WxHxD): 200x300x17 mm or 300x400x170 mm Protection: IP 66; color RAL 7035, UV-resistant UL 508 Solar panel with stand The solar panel is mounted on a mast and weighed-down with sacks of sand. The height of the mast is 3 m. Depending on the requirements, one or two panels may be used for operation. Each Panel: Nominal output 20 W, Dimensions (WxHxD): 600x300x35 mm Mast: Height: 3m Akku Lead-Gel battery
12V/12Ah Dimensions (WxHxD): Installation racks 19“ racks Front panel for installation in standard 19“ racks |
product overview
- BLIDS product film
(flash required) - BLIDS network - the System
- Hardware & Software
- Accessories
- Information material
Photo gallery product
